What the 2,500 m2 Shunde Factory Floor Actually Controls

Created on 11.21

What the 2,500 m2 Shunde Factory Floor Actually Controls

Foshan Akimita Shunde 1st Branch publishes a 2,500 m2 factory with more than 30 skilled workers, and describes incoming parts being inspected before production, strict in-process procedures, thorough testing and controlled packing. Those statements describe what the factory controls directly, rather than what a marketplace listing claims on its behalf. For a B2B buyer, the useful question is not how large the floor is but which steps of the build are owned by the same organisation that holds the design — because that is where a specification, a spare part and a test record can be traced to one configuration.
Gray-tiled appliance company building with a blue Chinese sign above an open entrance.

Key Facts

Production step
What the factory publishes
What a buyer can request
Incoming parts
Parts inspected before production
Confirmation that the variant matches the order line
In-process
Strict procedures and multiple inspection points
Batch-level inspection record
Unit performance
100% unit-level performance inspection before dispatch
Unit-level performance inspection record for the batch
Packing
Controlled packing before shipment
Documentation set matched to model code and voltage variant
Location
Shunde, Foshan, Guangdong, China
Factory or showroom visit, demonstration roast
The 2,500 m2 figure and the headcount are capability statements from the factory's own published material, not a rated capacity or an output promise. We do not state hourly or monthly production volumes, and we do not quote lead times.

Incoming Parts and In-Process Control

A roaster is assembled from parts whose behaviour interacts: heating elements, drum fabrication, motors, fans, temperature sensors, control boards and sheet-metal work. Inspecting parts before production is the point at which a wrong heating element, a wrong control board or a wrong voltage variant is cheapest to catch. It is also why a buyer should state the full model code, the control configuration and the voltage and plug variant together on the enquiry — the parts inspection can only be checked against a configuration that has been named.
The factory describes multiple inspection points before packing. That sits alongside a separate, more specific commitment: every machine receives a 100% unit-level performance inspection before dispatch, and the inspection record can be requested for the batch in the same order line. Incoming part inspection covers components; unit-level inspection covers the finished machine. They are different records, and a buyer should not treat one as a substitute for the other.

Why Shunde Is a Manufacturing Advantage

Shunde sits inside one of southern China's densest home-appliance manufacturing clusters. The factory's published material points to the local supply chain, a skilled labour pool and proximity to major shipping ports. For a roaster, the practical effect is that stainless drum fabrication, heating elements, control boards, motors, fans and temperature sensors are available within a short radius, so an engineering change can be fitted and roasted without waiting on a distributed supply chain.
The same cluster supports parts continuity after a model ships. Wear items on any drum roaster are mundane but decisive — drum motors, fans, bearings, heating elements and chaff collectors. A factory embedded in its own component ecosystem can keep those parts available for the installed base, which matters to a cafe or a distributor that cannot absorb a week of downtime. We recommend asking how spare parts are identified for your exact model code rather than assuming a generic part number applies across the range.

One Roof, One Feedback Loop

The published facility description places the R&D centre, the testing laboratory, a working cafe and the production floor at the same branch. Engineers and production staff work in the same building, prototypes move quickly to a test roast, and quality feedback returns immediately. A curve that drifts on a humid day or a chaff drawer that is awkward to empty is observed by the people who own the mechanical design and the controller.
That loop is also why the showroom matters. The 200 g, 300 g and 500 g machines can be compared side by side, the manufacturing process can be viewed, and a demonstration roast can be arranged with the buyer's own green coffee before dispatch. A demonstration is not the same record as a type-test report or a unit inspection; it shows the individual machine in operation, and it is the third layer of the factory's verification.

What the Factory Does Not Claim

We state the boundaries as plainly as the capabilities. Type-test documentation is produced for the model on a production-representative sample, with one unit submitted for testing, covering CE, CB, LFGB, FDA and RoHS test reports; it is not unit-by-unit certification. Pre-dispatch verification includes an ageing process, but we do not state that every unit undergoes a 24-hour burn-in test. Artisan is open-source third-party software and is not licensed or supplied with the machine. No prices, minimum order quantities, lead times, warranty terms, sales volumes or customer case studies appear in this description.
Foshan Akimita Shunde 1st Branch is part of the Richy group, whose parent company was established in 2007; the group entered the coffee industry in 2015 with manual brewing equipment before developing electric drum roasters. Export sales are handled by a separate legal entity in the same group under its own registered business scope — a normal division of roles, not two unrelated suppliers.

Frequently Asked Questions

How large is the Akimita factory?
The factory's published material describes a 2,500 m2 facility with more than 30 skilled workers in Shunde, Foshan, Guangdong, China. This is a capability statement, not a rated production capacity; we do not state output volumes or lead times.
What is inspected before a roaster ships?
Parts are inspected before production, the build passes multiple inspection points, and every machine receives a 100% unit-level performance inspection before dispatch. Type-test documentation covers the model design, and a demonstration roast shows the machine in operation. These are separate records.
Why does the Shunde location matter?
The local home-appliance cluster puts drum fabrication, heating elements, control boards, motors, fans and sensors within a short radius, so engineering changes can be validated quickly and spare parts stay available for the installed base.
Can I see the production floor before ordering?
Yes. The Shunde showroom displays the 200 g, 300 g and 500 g machines side by side, the manufacturing process can be viewed, and a demonstration roast with your own green coffee can be arranged. Confirm the model code and voltage variant on the current specification sheet for the exact configuration ordered.

Specification Note

This article describes production capability using the factory's published facility, development and product pages, reviewed in November 2026. Rated capacity, cycle times, dimensions, net weight and certificate fields are deliberately not stated as fixed values; they are controlled by the current specification sheet and the document copies issued for the exact model code ordered. No prices, minimum order quantities, lead times, warranty terms, sales volumes or customer case studies are included.

Suggested Internal Links

Factory and R&D evidence hub · Inside the R&D centre: design to production · Three verification records for a buyer audit · OEM/ODM engineering boundaries · Four-model recommendation guide · Four-model ordering checklist · Book a Shunde showroom demonstration
Contact
Leave your information and we will contact you.

Coffee Roaster

500g Model Alpha

500g Model Delta

200g Model Cubean

Setup Download

Setup Download

Customer Service

电话