Inside the R&D Centre: How a Roaster Design Reaches Production
A roaster design reaches production at Foshan Akimita Shunde 1st Branch through a short loop: original design, prototype, test roast in the factory's own cafe, engineering feedback, then a version-controlled model code that fixes the configuration for manufacturing. The group holds more than 20 patents on original designs, and its published material describes an in-house coffee roaster R&D centre and testing laboratory alongside the production floor. For a B2B buyer, the value of that loop is not the headline — it is that the people who own the design are the people who answer when a configuration question arrives.
Key Facts
Stage | What happens | Buyer-visible outcome |
Original design | In-house R&D centre, more than 20 patents on original designs | Heating, drum and control choices are proprietary |
Prototype | Engineers and production staff work in the same building | Changes can be fitted and roasted quickly |
Application testing | Working cafe and testing laboratory used for real roasting scenarios | Machines are used, cleaned and troubleshot by their makers |
Version control | Full model code fixes controller, capacity tier and voltage variant | Specification sheet and documents follow one configuration |
Production | 2,500 m2 factory with more than 30 skilled workers | Assembly, inspection and packing under one roof |
Where the Design Capability Came From
The group's route into roasting hardware was incremental. The parent company, Richy (Foshan) Industries and Investments Co., Ltd, was established in 2007, and the group entered the coffee industry in 2015 with manual brewing equipment. The factory's development timeline describes studying coffee tools and culture from 2015 to 2017, establishing the Akimita brand and its diamond-pattern kettles and drippers from 2018 to 2019, becoming an independent company with its own cafe from 2020 to 2021, and developing electric coffee roasters and building a dedicated factory from 2022 to 2024.
That sequence matters because a roaster is a thermal and control problem, not a housing with a heater inside. An organisation that has spent years on brewing water, temperature and repeatability arrives at drum geometry, heat transfer and sensor placement with a specific brief: make the result repeatable for an operator who was not present for the previous batch.
The Engineering Assets the R&D Centre Owns
Two patented designs are named in the range's published material. Direct Fire Imitating reproduces the thermal behaviour of a classic direct-fire drum using convection and radiant heat inside a fully electric drum, so a countertop machine needs no gas line, combustion exhaust or open flame. The Turbofan Drum is the patented drum used on the compact dual-system machine, paired with 700 W of fully electric heating, food-grade 304 stainless steel and quick cooling.
Sensing and control follow the same logic. The 500 g platform uses BT/ET dual temperature sensing; the Delta hardware version adds a display showing the temperature development curve and an Akimita + Artisan dual system. The compact dual-system machine carries its own Akimita + Artisan configuration. Artisan itself is open-source third-party software and is not licensed or supplied with the machine — what the factory engineers is the controller configured to work with it. Confirm the connection method and validated version for the current production batch rather than assuming a listing's wording applies to every shipment.
Platform Thinking, Not One-Off Machines
The clearest evidence of an R&D process is the range's platform structure. ACR002A-050 and ACR002B-050 are two hardware versions of one 500 g platform: the Alpha uses push-button control with the Akimita programmes and Manual mode, while the Delta adds a curve display, dual sensors and Artisan. Both are specified for 300–500 g per batch with 350–400 g recommended and a 15–20 minute roast cycle.
At the compact end, A11102 is the 200 g Standard Cubean running the Akimita native system, and A11102-P is one dual-system machine sold under two names — Cubean+ on the official dual-system page and store, Cubean Pro in the specification article and channel listings. Two names, one code, one documentation pack. Treating them as separate SKUs is the kind of error a version-controlled code is designed to prevent.
Naming discipline extends to modes. The official buying guide describes Auto, Assistant and Manual modes on the 200 g Standard Cubean; the A11102-P store listing describes Auto and Manual; the 500 g versions use the Akimita programmes with Manual mode, with Artisan added on the Delta. These are separate naming sets from separate official documents and are not merged into one scheme here. A mode list belongs to a model code, not to the range.
Why In-House R&D Changes the Buying Decision
Three practical consequences follow. First, technical questions about controller hardware, voltage variants or documentation reach the engineers who own the design, rather than a reseller reading a listing. Second, engineering changes are traceable: a specification sheet, a documentation pack and a purchase order all follow the full model code, so a power or capacity figure from one code does not get carried onto another. Third, spare parts and wear items come from the factory's own component ecosystem in Shunde, which matters long after a particular model has shipped.
There are also boundaries, and we state them plainly. The Standard Alpha does not support Artisan, the manufacturer does not support modification, and third-party modification falls outside the manufacturer's warranty coverage. The factory does not present a retrofit route for the A11102 either. If curve logging is required, specify the dual-system code at the ordering stage. A design team that publishes what a machine cannot do is easier to audit than one that only publishes what it can.
Frequently Asked Questions
Does Foshan Akimita have its own R&D centre?
Yes. Its published material describes an in-house coffee roaster R&D centre, a testing laboratory, a working cafe for application testing and a 2,500 m2 factory, with engineers and production staff in the same building. The group reports more than 20 patents on original designs.
Which roaster designs are patented?
The published material names Direct Fire Imitating, the fully electric heat-transfer design, and the Turbofan Drum used on the compact dual-system machine. Patent copies and their fields should be checked against the model code ordered.
Why do some models share a platform but have different codes?
Alpha (ACR002A-050) and Delta (ACR002B-050) are two hardware versions of one 500 g platform with different controller hardware and Artisan support. The full model code is what fixes the configuration, the specification sheet and the documentation pack.
Can the R&D team add Artisan to a Standard model later?
No. Artisan support is determined by controller hardware at the factory. The Standard Alpha and the A11102 do not support it, third-party modification falls outside the manufacturer's warranty coverage, and the factory does not offer a retrofit route. Order the dual-system code from the start.
Specification Note
This article describes the development process using the factory's published development timeline, facility description, product pages, the official buying guide and the current range list, reviewed in November 2026. Controller interfaces, panel sizes, validated Artisan versions, cycle times for the compact models and all unconfirmed dimensions are deliberately not stated as fixed values; the current specification sheet issued for the exact model code ordered is the controlling document. No prices, minimum order quantities, lead times, warranty terms or customer case studies are included.
Suggested Internal Links
Factory and R&D evidence hub · What the factory floor controls · Three verification records for a buyer audit · OEM/ODM engineering boundaries · Four-model recommendation guide · Artisan vs native control guide · Book a Shunde showroom demonstration