A11102 Cubean Roasting Modes: Auto, Assistant and Manual Explained

Created on 11.18

A11102 Cubean Roasting Modes: Auto, Assistant and Manual Explained

The Skywalkey Cubean A11102 offers three roasting modes: Auto, Assistant and Manual. Auto runs a pre-loaded curve for consistent results with minimal input; Assistant guides the roast through each phase while still allowing adjustments; Manual gives the operator control over heat, airflow and drum speed. All three run on the Akimita native control system. Artisan curve logging is not part of the A11102 and belongs to the Dual System Cubean+.
Black coffee roaster with digital controls on a wooden counter against a blue geometric wall.

Key Facts

  • Modes on A11102:
  • Control system:
  • Auto mode:
  • Assistant mode:
  • Manual mode:
  • Product-page labels:
  • Artisan:
  • Transparent roast chamber:

What Each Mode Does

Auto is the shortest path from green coffee to a repeatable result. The operator charges the drum and the machine follows a stored curve, which is why the 200 g class is often recommended as a first roaster. The official product page describes this mode under the label Easy Roasting (Auto Mode) and associates the range with SCA standard profiles.
Assistant keeps the structure of a guided roast but leaves room to intervene. It suits an operator who understands the phases of a roast and wants to adjust a specific stage without programming the whole batch. Manual removes the guidance and hands heat, airflow and drum speed to the operator, which is where profile development and experimentation happen.
Close-up of roasted coffee beans filling the frame.
The transparent roast chamber supports all three. Being able to see colour development and hear first and second crack is a practical feedback channel on a 200 g machine, especially when a new origin is being evaluated.

Why Three Modes Matter on a 200 g Drum

A 200 g batch is small enough that an unsuccessful experiment costs 200 g of green coffee rather than a production run. That changes how a machine gets used: an operator can run an Auto batch for the house coffee on Monday, an Assistant batch to test a new origin on Wednesday, and a fully Manual batch at the weekend without committing a week's output to any of them.
The three modes also let one machine serve several skill levels in the same household, café or training room. A beginner is not forced into Manual on day one, and an experienced roaster is not locked out of control later. Mode selection is an operator decision, not a hardware version difference.

Naming Note: Three Modes and the Product-Page Labels

The official A11102 product page presents two working styles, Easy Roasting (Auto Mode) and DIY Roasting (Manual Mode). The official buying guide describes the 200 g Standard Cubean as running Auto, Assistant and Manual modes. Both are the factory's own published descriptions. We do not merge them into a single naming scheme here, and we do not treat Assistant as a renamed or re-badged version of any other function. The interface labels shown on the current A11102 specification sheet and on the delivered machine are the controlling reference.
This is also the boundary with Artisan. Artisan is third-party open-source software for curve logging and analysis, offered as a factory configuration on the Dual System Cubean+ and the Delta. It is not a fourth mode on the A11102, and it is not available by changing a setting on this machine.

Frequently Asked Questions

Does the Skywalkey Cubean A11102 have an Auto mode?
Yes. Auto runs a pre-loaded roast curve with minimal operator input. The official product page labels this working style Easy Roasting (Auto Mode).
Can I control a roast manually on the A11102?
Yes. Manual mode gives the operator control of heat, airflow and drum speed. The official product page labels it DIY Roasting (Manual Mode).
Does the A11102 support Artisan logging or curve export?
No. Artisan compatibility is a feature of the dual-system models, the Cubean+ and the Delta. Specify the Dual System Cubean+ at the ordering stage if profile logging is required.
Are SCA standard profiles included with the A11102?
The official product page describes this machine class with SCA standard profiles in connection with Auto mode. Confirm the exact profile set shipped with your configuration on the current A11102 specification sheet.

Specification Note

Mode descriptions follow the official product page and the official buying guide, reviewed in November 2026. Exact interface labels, stored profile sets and firmware behaviour are confirmed against the current A11102 specification sheet and the machine delivered.
Contact
Leave your information and we will contact you.

Coffee Roaster

500g Model Alpha

500g Model Delta

200g Model Cubean

Setup Download

Setup Download

Customer Service

电话